Introducing the Alpha G-1200 electric over hydraulic brake actuator! This meticulously designed unit boasts a sleek and modern appearance while offering top-of-the-line durability in even the most demanding conditions. In addition, its compact size makes it effortless to install, and its brake line fitting comes with 360 degrees of movement, allowing for ultimate connection flexibility from any mounting position. In addition, all Deutsche Hydrapro 1200psi brake actuators have a swift response time, reaching 1,000 psi in 0.118 seconds.
 
Best used with DRUM BRAKES (Over 8k Axle Capacity)
 
Features:
The Alpha G-1200 (1200psi) EOH Brake Actuator has an in-built compatibility adapter, so no external compatibility device is necessary.
High-powered DC motor and quality pump with minimal moving parts.
Weatherproof, anodized alloy case protects components from external elements (such as saltwater, extreme temperatures, and poor road conditions).
Meets all IP67 requirements.
Anodized, T6-grade extruded alloy housing protects from different environments and has a great aesthetic design.
Independently sealed fluid tank.
Conformal coating on the circuit board is designed to provide extra protection from moisture.
Two-year warranty.
Designed & Assembled in Australia
Specifications:
Model: Alpha G-1200 EOH brake actuator
SKU: G1200-Alpha
DOT Compliant
Trailer Mounted
Application: Single, tandem, and tri-axle trailers with drum brakes
Distance between mounting holes: 10.95” & 1.38” (278mm & 35mm)
Mounting Hole Diameter 1.2cm x 0.8cm (12 x 8 mm) slot
Hydraulic Port Size: 3/16 inverted flare (standard brake line fitting)
DOT 3 & DOT 4 Brake Fluid Compatible (Do not use Super DOT 4 or DOT 4+)
Fluid Capacity of 15.7 oz
Power: 12V DC (min 30 amp feed)
Max Current Draw at full pressure approximately 18-24 amps.
Wire Configuration:
Black: 12-volt power
Blue: brake controller
Yellow: breakaway
White: ground
Wire Gauge Recommendation
A minimum of 10 gauge on black and white
A minimum 12 gauge on blue and yellow
Dimensions:
Length: 10” (255mm)
Height: 6” (152mm)
Width: 3.6” Base / 1.7” Top (90mm Base / 44mm Top)
Mounting centers: 10.9” L and 1.6” W (275mm and 40mm)