HBA16 Hydrastar-1600 Elec/Hydraulic - Disc Brake With Dexter 9 Amp/Hr Dreakaway Kit    INCLUDES SHIPPING & Handling USPS

HBA16 Hydrastar-1600 Elec/Hydraulic - Disc Brake With Dexter 9 Amp/Hr Dreakaway Kit INCLUDES SHIPPING & Handling USPS

HBA16 Hydrastar-1600 Elec/Hydraulic - Disc Brake With Dexter 9 Amp/Hr Dreakaway Kit    INCLUDES SHIPPING & Handling USPS
Click to enlarge image(s)
Hydrastar - 1600 PSI, Carlisle Hydrastar-1600 Elec/Hydraulic - Brake Actuator
(For Disc Brakes Only)

This Item Can chip to Australia--Price includes shipping

Newly updated Generation 7 HydraStar actuator offers:
Faster response for reduced stopping distance
Simplified wiring - only 4 wires
Draws power only when brakes are applied - no need for ory switch
Smaller footprint requires less space for easier installation
Compare these HydraStar advantages:
Sealed unit - weather tight
Does not exceed tow vehicle manufacturers' wiring amp rating
Unit mounted bleeder fitting simplifies brake bleeding

Vastly superior to surge brakes
Eliminates the feel of being pushed by trailer, problems with backing a trailer uphill and brake drag
Easily replaces surge brakes on trailer
Meets all DOT regulations and complies with CFR-393 federal braking requirements...surge brakes are illegal in many states
Dimensions: 11.8" long x 3" wide x 7.3" high, shipping weight 12 lbs.

Specifications:
• In cab controller required –
See instruction manual or our website for a list of approved controllers
• 12 volt DC operation –
Federal regulations require a battery and breakaway kit on trailer. Carlisle
(HBA-BA) kit recommended, works with any 5 amp hr. breakaway kit
• Electrical connections –
Recommended minimum wire; 12-gauge for splicing into power,
ground and breakaway; 16-gauge for controller output
• Hydraulic brakes –
For use with DOT 3 or DOT 4 brake fluid systems

• Trailer-mounted and self-contained weather tight enclosure
• Dimensions –
11.8" long x 3" wide x 7.3" high, shipping weight 12 lbs.
• Accessories –
– Breakaway battery kit (HBA-BA)
Automatically applies the trailer brakes in the event the
trailer and towing vehicle become separated
– 1/4" line adapter (HBA-BLC)
Allows conversion to 1/4" brake line
1/4" brake lines improve braking performance on trailers
over 20' and/or with triple axles

Dexter Breakaway Kt 9Amp/Hr
Dexter’s 9 amp breakaway kit features a rechargecable, sealed 34-285-00
maintenance-free battery and charger, for trouble free towing.
The kit is compact in design and exceeds DOT regulations.


PLEASE NOTE:
Carlisle Industrial Brake does not recommend the Hoppy or TAP breakaway kit numbers 20099 or 20400, or any kit equipped with a built-in battery meter and LED test lights for use in conjunction with trailers equipped with disc brakes. There is a possibility of the brakes not releasing completely, resulting in damage to the brake system.
Copyright © Trailer Parts 4U
Greenville, SC
TrailerParts4U@hotmail.com