"THE OLD WAY - THE SLOW WAY"
Vehicle-to-trailer wiring used to be a real chore. The job took hours trying to find the correct wires on the tow vehicle and then cutting, splicing, soldering and taping to complete the installation.
HOW THE HOPPY® LITEMATE® SYSTEM WORKS
With the Hoppy® LiteMate® system, do-it-yourself consumers and/or the professional installer can do a complete vehicle to trailer wiring installation in just minutes. This modular system plugs together to accommodate most vehicle and trailer combinations.
Step One: Consult the Application Guide for the correct wiring kit part number.
Step Two: Locate the factory OEM taillight wiring harness on the tow vehicle.
Step Three: Unplug the wiring harness and simply plug in the Hoppy® connector. This unit will be prewired to provide Right Turn, Left turn, Taillight and on some models, the Backup Function.
Step Four: Plug tin the 4-wire flat extension to the Hoppy® connector. The two piece system provides for a more versatile installation as well as a plug simple replacement option if the unit ever becomes damaged.
Step Five: Optional "Pre-wired" 4-wire flat to 6-way round and 4-wire flat to 7-way RV Blade round extension adapters are available to custom install the vehicle side wiring to most trailer combinations.
NOTE: Every wiring kit includes everything needed to install a 4-wire flat application: Terminal grease to weatherproof all connections, cable ties to install the completed wiring out of harms way, a ground screw to maintain a proper ground and dust cap to protect the 4-wire flat.